STANLEY_Sliding_and_Folding_Hardware_PL69_Price_List_2019

Open the original PDF document

View PDF

Sliding and Folding Hardware

PRICE LIST 69SF

EFFECTIVE: APRIL 8, 2019

General Index

Contact Information 2
Terms and Conditions of Sale 3-4
Limited Warranty 5
Bifold Track and Hardware 6-9
ByPass Track and Hardware 10-14
Pocket Door Track, Hardware and Frames 15-16
Cross Reference of EDP Number to Class Number 17-18
Quoting and Ordering 19-20
Returned Authorization (RA) 21
Returned Authorization (RA) Non-Warranty 22
Fullfillment Issues 22
Return Order Request 23

STANLEY Sliding and Folding Hardware

Hours of Operation: Monday – Friday, 8:00 am – 5:00 pm EST

Toll Free Phone: 1.855.365.2407 Toll Free Fax: 1.877.835.1030

TERMS AND CONDITIONS OF SALE

The terms and conditions contained herein shall govern the sale of all products located in the price catalog and/or offered for sale by dormakaba USA Inc. ("dormakaba USA"), except for those products as set forth under separate Value Added Reseller Agreements. The acceptance of any order is expressly made conditional upon your assent to these Terms and Conditions of Sale.

PRICES: dormakaba USA reserves the right, in its sole discretion, to change or amend its price list (including, but not limited to, adding or removing Products from the price list), and standard terms and conditions of sale as contained in its catalogs, price list or published sales policies, without incurring any liability whatsoever to its Customer or others. All orders will be filled at the List Price in effect at the time of order placement. All prices are subject to change without notice and are not guaranteed.

TAXES: List prices do not include federal, state or local taxes.

ORDERS: No order for Products shall be deemed to have been accepted by dormakaba USA until written notice of its acceptance is received by the Customer from dormakaba USA via an order acknowledgement. dormakaba USA reserves the right, in its sole discretion, to decline to accept any order. Purchase Orders will bind dormakaba USA only to the extent accepted by dormakaba USA's written confirmation or delivery.

dormakaba USA will attempt to fill orders in the order in which they are received, subject to prior orders. However, dormakaba USA reserves the right to allocate orders or fill an order or orders ahead of prior orders, if, in its judgment, the facts warrant such a change.

Any additional provisions in a Purchase Order, including any pre-printed terms, shall be void and not binding on dormakaba USA, unless expressly accepted by dormakaba USA. For greater certainty, the acceptance by dormakaba USA of a Purchase Order shall not be deemed acceptance of the additional terms of such Purchase Order.

dormakaba USA will accept orders via phone, email, fax or courier. dormakaba USA will send out an order acknowledgement for all orders received via email, phone or fax.

NOTE: Receipt or possession of this price catalog does not grant approval to quote or purchase products. Please contact your dormakaba USA Sales Representative for further details.

KEYING SYSTEM ORDERS: All orders of keying systems specifying delayed fulfillment must be fulfilled within twelve (12) months of the order date. Said request for fulfillment must include complete keying instructions for the order to be acknowledged with an estimated delivery date. Failure to properly request fulfillment of the order within twelve (12) months of the order date will make the order void and nonrefundable.

SPECIAL ORDERS: Any modification to a standard product configuration is considered a special order. No credits will be issued for returned special orders unless authorized by dormakaba USA Customer Service.

INCOMPLETE ORDERS: An incomplete order is one that is not fully specified according to the appropriate nomenclature required for that product. Any incomplete order will not be entered and will be referred to the appropriate dormakaba USA Sales Representative for resolution.

SAMPLES: Please contact your local dormakaba USA Sales Representative for sample requests.

MINIMUM CHARGE: The expense of handling an order necessitates a minimum charge of $50.00 net per invoice.

CREDIT LIMITS: dormakaba USA's policy is to extend Net 30-day terms/open account combined with a credit line based on financial capacity. For all accounts dormakaba USA requires a Credit Application and Sales Tax Exempt Certificate (if applicable). dormakaba USA evaluates traditional sources of credit information: D&B, trade and bank references, financial information, and business plans. The supply of credit herein shall be at the discretion of dormakaba USA. If available information and/or financial circumstances will not support open accounts terms, dormakaba USA offers Cash in Advance and Credit Card (MasterCard or VISA) terms. dormakaba USA performs periodic reviews of credit lines and terms of payment and may request updated financial information.

dormakaba USA reserves the right to withhold delivery of Product if Customer does not meet dormakaba USA's credit requirements for the amount of Product ordered, or the amount of Product which remains unpaid (whether or not overdue) exceeds the limit established by dormakaba USA for Customer. Customer shall provide, at dormakaba USA's request, an acceptable letter of credit or guarantee or security in a form and amount determined by dormakaba USA.

If Customer shall become overdue on its account or otherwise defaults in any payment to dormakaba USA or if its financial condition shall at any time appear inadequate to warranty further shipment on an open account basis, dormakaba USA shall have the right, without liability, to refuse to accept any or all orders, to cancel any and all orders, to delay shipments, or to require advance payment before accepting or shipping any orders. All orders and all shipments are subject to approval by the dormakaba USA Credit Department.

PAYMENT TERMS: dormakaba USA standard payment terms are 2% 15, net 30 days from date of invoice.

Effective September 28, 2014, a $45.00 convenience fee will apply to all payments made by Credit Card towards open invoices on your account. You may choose to pay by credit card by reaching out to your Credit Analyst directly in order to process payment. You can avoid paying the $45.00 convenience fee by enrolling and paying open invoices via Billtrust Invoice Gateway (https://secure.billtrust.com/ stanleymechanical/ig/signin) with an ACH Payment (bank transfer from checking or savings account) free of charge. Payments by check, or money order should continue to be sent directly to the remit-to address noted on invoices.

dormakaba USA shall be entitled to charge and Customer shall pay interest on overdue invoices at the rate of two percent (2%) per month calculated from the date of the invoice to the date of payment, including any attorney fees incurred by dormakaba USA resulting from the collection of such overdue payment. Customer shall pay all sums owing to dormakaba USA without any deduction or abatement and Customer shall have no right of set-off.

In the event that Customer disputes any portion of the payment due, Customer shall be obligated to pay the balance which is not the subject of dispute.

Without limiting any other rights it may have under these terms of sale and applicable law, all of dormakaba USA's obligations under this Agreement, including obligations of supply, or any Purchase Order, can be suspended or cancelled should Customer be delinquent in making payment for previously shipped Products.

INTERNATIONAL SALES:

International Resellers located outside of the United States of America who place orders are subject to and must pay by (1) Cash in Advance, (2) Confirmed Irrevocable Letter of Credit, (3) Standby Letter of Credit.

All international shipments shall be FCA (Incoterms 2010) from dormakaba USA's facility in Indianapolis, Indiana USA. dormakaba USA shall be deemed to have delivered all Products and related goods when such are put in the custody of a carrier at dormakaba USA's plant or warehouse above, at which time all title and risk of loss or damage shall pass to Customer.

TERMS AND CONDITIONS OF SALE (continued)

SHIPPING/FREIGHT: All Products shall be shipped FOB Origin domestic or FCA International (INCOTERMS 2010) from dormakaba USA's facility in Indianapolis, Indiana USA. dormakaba USA shall be deemed to have delivered all Products and related goods when such are put in the custody of a carrier at dormakaba USA's plant or warehouse above, at which time all title, risk of loss or damage shall pass to Customer. All shipments will be made in accordance with the preferred routing, carrier assignments, and operational guidelines of dormakaba USA. Customer shall bear all costs of freight, insurance and associated costs and shall make all arrangements for same.

Single or combined shipments including dormakaba USA lock sets, exit devices, hinges and door closers will be considered for free freight with orders at or above $5000 net (product combination must be on same purchase order). Orders less than $5,000 will be shipped freight prepaid with shipping cost added to the invoice, including a nominal freight charge to be determined by dormakaba USA at time of shipping.

Hinge only orders will be considered for free fright with orders at or above $750 net. Orders less than $750 will be shipped freight prepaid with shipping cost added to the invoice, including a nominal freight charge to be determined by dormakaba USA at time of shipping.

These freight terms apply only to a single destination within the contiguous United States.

Should a shipment qualify for one of dormakaba USA's free freight programs, the Products shall be shipped FOB Origin domestic (with exception to prepaid freight) or FCA International (INCOTERMS 2010) (with exception to prepaid freight) from dormakaba USA's facility in Indianapolis, Indiana USA.

DELIVERY: Orders shall be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Manufacturing lead time will begin once all information is received to process an order. Delivery dates given by dormakaba USA as part of order acknowledgment for accepted orders for Products or related goods will be honored by dormakaba USA on a best effort basis. Shipping dates shown on order acknowledgments are based upon dormakaba USA's estimate and cannot be guaranteed. dormakaba USA will not be liable for any loss or damage resulting from delay in filling orders, including any direct or consequential loss or damage. dormakaba USA reserves the right to make partial shipments unless the order specifies otherwise.

CHANGES/CANCELLATIONS: After orders are entered for manufacturing, changes or cancellations cannot be accepted without dormakaba USA written permission, and may be subject to a change or cancellation charge equivalent to 30% of the purchase price.

Orders for special and/or custom designed goods not immediately saleable to another customer are not changeable, cancelable, or returnable.

RETURNED GOODS: dormakaba USA Customer Service MUST authorize all returns. All goods must be returned in original packaging and be in resalable condition except for warranty returns. Use fax number 888-214-1918 for returned goods authorization only. Only goods with an invoice date of less than one (1) year will be considered for a Return Goods Authorization (RGA). All material returned to dormakaba USA, regardless of the reason, must have a correct RGA number applied to the outside of the shipping carton. A restocking charge of 30% of the purchase price will be applied to the Customer's account except for warranty returns. Transportation charges of returned goods must be prepaid by Customer. All goods must be returned within sixty (60) calendar days of RGA issue date. All goods must be returned in original packaging and be in resalable condition except for warranty returns. Product not returned in salable condition or after sixty (60) days of the RGA issue date is subject to disposal by dormakaba USA with no credit issued.

dormakaba USA cannot authorize the return of discontinued product. Under no circumstances will special order items be accepted for return, unless covered by warranty.

EXPORT REGULATIONS: Customer agrees to conform to, and abide by, the export laws and regulations of the US, including, but not limited to, the Export Administration Act of 1979 as amended and its implementing regulations. Diversion contrary to US laws and regulations is prohibited.

MASTERKEYING: Best Masterkey Code and Masterkey Service Policy can be found at www.bestaccess.com.

LIMITATION OF LIABILITY: EXCEPT AS OTHERWISE REQUIRED BY APPLICABLE LAW, dormakaba USA SHALL HAVE NO LIABILITY FOR ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, LIQUIDATED OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS, COSTS OF DELAY, ANY FAILURE OF DELIVERY, OR BUSINESS INTERRUPTION, REGARDLESS OF WHETHER THE CLAIM GIVING RISE TO SUCH DAMAGES IS BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), PRODUCT LIABILITY, OR OTHERWISE, EVEN IF dormakaba USA HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL dormakaba USA's TOTAL AGGREGATE LIABILITY TO CUSTOMER, UNDER ANY LEGAL THEORY, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), PRODUCT LIABILITY, INFRINGEMENT OF OR DAMAGE TO ANY PATENT, COPYRIGHT, TRADEMARK, OR OTHER INTELLECTUAL PROPERTY RIGHTS OF ANY PERSON OR ENTITY, OR OTHERWISE IN RELATION TO THE SALE OF dormakaba USA PRODUCTS TO CUSTOMER, EXCEED THE AGGREGATE OF THE AMOUNT PAID OR PAYABLE TO dormakaba USA BY CUSTOMER FOR THE ORDER GIVING RISE TO THE ALLEGED LIABILITY.

LIMITED WARRANTY: The terms and conditions outlined above are subject to dormabaka USA's Limited Warranty, which is included in the Price Catalog and is incorporated herein by reference. Upon return of a defective product, dormakaba USA shall either repair or replace the product, in its sole discretion, in accordance with our standard warranty.

EXCEPT AS SET FORTH HEREIN, dormakaba USA MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, AND BUYER ACKNOWLEDGES THAT NO REPRESENTATIONS, WARRANTIES, PROMISES OR STATEMENTS HAVE BEEN MADE BY dormakaba USA, WITH RESPECT TO THIS PRODUCT, OR ANY PART OR PORTION THEREOF. IN ADDITION, dormakaba USA MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THIS PRODUCT OR ANY PART OR PORTION THEREOF, FOR ANY PURPOSE, NOR ANY WARRANTY WHICH EXTENDS BEYOND THE DESCRIPTION ON THE FACE HEREOF. dormakaba USA SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES SUFFERED BY BUYER OR ANYONE CLAIMING BY, THROUGH OR UNDER BUYER, AS A RESULT OF THE CONDITION OF THIS PRODUCT, OR ANY PART OR PORTION THEREOF, AND THERE ARE NO ORAL OR WRITTEN UNDERTAKINGS OR AGREEMENTS OF ANY TYPE PROVIDED BY dormakaba USA EXCEPT AS EXPRESSLY SET FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR STATE.

GOVERNING LAW: These Terms and Conditions of Sale and any subsequent sales agreements between dormakaba USA and Customer shall be construed in accordance with the laws of the State of Indiana. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement.

LIMITED WARRANTY

What is Covered : dormakaba USA Inc. ("dormakaba USA") warrants that the Products manufactured by dormakaba USA, identified below, and sold under its trade names " STANLEY " and " STANLEY HINGES AND DOOR ACCESSORIES " are free of defects in materials and workmanship as outlined below. The sole and exclusive liability of dormakaba USA under this warranty is limited to the repair or replacement of any Product or component part covered by the warranty at the sole discretion of dormakaba USA.

Who is Covered : This warranty is extended only to the Seller's distributors of products and the end user who purchases products for purposes other than resale (collectively, "Purchaser").

Hardware Warranty Period :

  • All Electrified Hinges (Butt and Continuous with CE/CS option) shall be warranted for one (1) year from the date of sale.
  • All two, three or five knuckle "F" (Plain Bearing), "FBB", (Ball Bearing), and "CB" (Concealed Bearing) mechanical hinges warranty term shall be limited lifetime for a period of the useful life of the building in which the products are originally installed.
  • 2060R Series (Spring Hinges) warranty term shall be limited lifetime for a period of the useful life of the building in which the products are originally installed.
  • Pin and Barrel Continuous Hinges (640 and 650 Series) warranty term shall be (5) years from date of sale.
  • Geared Aluminum Continuous Hinges (660 Series) warranty term shall be limited lifetime for a period of the useful life of the building in which the products are originally installed.
  • Sliding and Folding hardware (Bi-Fold, By-Pass, and Pocket Door) shall be warranted for (1) year from the date of sale.
  • Miscellaneous Hardware Portfolio Offering (Wardrobe Pivots, Emergency Hardware, Olive Knuckle Hinges, Detention Hinges, Residential Hinges, and Parts) shall be warranted for (1) year from the date of sale.
  • Finishes shall be warranted for (3) years from the date of sale excluding US10B/613 "Oil Rubbed Bronze" finish.

Warranty Claims : Any Products believed to be defective as covered by this warranty may not be returned without prior written Returned Materials Authorization (RMA) from dormakaba USA Product Support (855) 365-2407 covering specific items and quantities within thirty (30) days from the discovery of the alleged defect(s). dormakaba USA will inform the purchaser where to ship said Product(s), shipping charges prepaid by you, for examination. In the event such examination reveals a defect covered by this warranty; dormakaba USA will, at its sole option, repair or replace the Product, and return it or its replacement to the purchaser, with charges only for shipping.

Exclusions: This warranty is subject to the use of the Products in accordance with dormakaba USA's standard recommendations for door sizes and frequency of operation. This warranty specifically excludes, and dormakaba USA shall not be held responsible for the following:

  • a) COSTS ASSOCIATED WITH INSTALLING, REMOVING OR REINSTALLATION OF THE PRODUCT.
  • b) Damage caused by Product malfunction or failure attributable to acts of God.
  • c) Improper use or installation.
  • d) Poor or no maintenance.
  • e) Work performed by someone other than an Authorized dormakaba USA technician.
  • f) Failure to follow dormakaba USA's operating instructions or environmental specifications.
  • g) Incorrect application, modification, vandalism, erosion or corrosion, shipping and/or handling, improper storage, accident, misuse, abuse or any other cause not within the control of dormakaba USA.
  • h) This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk and expense of the party making the modifications.
  • i) dormakaba USA shall not be liable for any repairs, replacements, or adjustments to the product or any costs of labor performed by the Purchaser or others without dormakaba USA's prior written approval.
  • j) dormakaba USA provides no warranty or guarantee that its cores and/or cylinders will function properly or be mechanically compatible with products not manufactured by dormakaba USA.
  • k) The US10B/613 finish is considered to be a living finish that will change over time with use and age and is expressly excluded from this warranty. The finish changes that occur are indicative of normal wear and tear and reflect the essence of a living finish. The finish changes are not considered manufacturing defects and are not covered by this warranty.

Third Party Warranty : Except as otherwise provided above, dormakaba USA makes no warranty, express or implied, with regard to third party hardware or software and expressly disclaims the implied warranties or conditions of merchantability or merchantable quality, fitness for a particular purpose, title, infringement and those arising by statute or otherwise in law. Customer's sole recourse for warranty claims is with the manufacturer of the Product. However, dormakaba USA agrees to pass through any third-party warranty that dormakaba USA receives from the manufacturer of the Products to Purchaser. The extent of any third-party warranty details, terms and conditions, remedies and procedures may be expressly stated on, or packaged with, or otherwise accompanying the Products.

LIMITATION OF WARRANTIES: THIS WARRANTY IS GIVEN EXPRESSLY AND IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO UNDERSTANDINGS, AGREEMENTS, REPRESENTATIONS, OR WARRANTIES NOT SPECIFIED HEREIN.

dormakaba USA SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES SUFFERED BY PURCHASER OR ANYONE CLAIMING BY, THROUGH OR UNDER PURCHASER, AS A RESULT OF THE CONDITION OF THIS PRODUCT, OR ANY PART OR PORTION THEREOF.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR STATE.

THIS WARRANTY IS GOVERNED BY THE LAW OF THE STATE OF INDIANA WITHOUT REGARD TO ITS CONFLICTS OF LAW PRINCIPLES. dormakaba USA AND PURCHASER AGREE THAT THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS SHALL NOT APPLY TO SALE OF THE PRODUCTS COVERED BY THIS WARRANTY.

Bi-Fold Track and Hardware Continued on next page Model Size Finish BHMA EDP# Stock Item List Price Order Box Qty Carton MPG n next page
Model Size Finish ВНМА EDP# Stock Item List Price Order
Multiple 		Box Oty Carton
Qty 		MPG
BF20-10^
Top Pivot Bracket 		2C 602 524236001 0.67 200 Ea. 200 Ea. M4
BF20-31^
Top Pivot Guide 		2C 602 524208001 0.11 400 Ea. 400 Ea. M4
BF25-31^
Spring Loaded Top
Guide Pivot 		2C 602 524452001 V 0.45 200 Ea. 200 Ea. M4
BF30-00-30
2 Door Bifold Retail
Set 		30" Open-
ing 		402025 √ 10.12 6 Sets 6 Sets 6 Sets M4
2 Door BF30-00-36
2 Door Bifold Retail
Set 		36" Open-
ing 		402032 √ 10.68 6 Sets 6 Sets 6 Sets M4
4 Door BF30-00-48
4 Door Bifold Retail
Set 		48" Open-
ing 		402044 V 15.18 6 Sets 6 Sets 6 Sets M4
BF30-00-60
4 Door Bifold Retail
Set 		60" Open-
ing 		402054 V 16.49 6 Sets 6 Sets 6 Sets M4
BF30-00-72
4 Door Bifold Retail
Set 		72" Open-
ing 		402064 V 17.80 6 Sets 6 Sets 6 Sets M4
BF30-01-24^
Steel Track with Pivot
Bracket-2 Door 		23-3/4" White 522004001 V 1.62 25 Ea. 25 Ea. 25 Ea. M4
BF30-01-30^ 29-3/4" White 522032001 √ 1.89 25 Ea. 25 Ea. 25 Ea. M4
BF30-01-362^ 35-3/4" White 522060001 √ 2.16 25 Ea. 25 Ea. 25 Ea. M4
BF30-01-364^
SteelTrack with Pivot
Bracket-4 Door 		35-3/4" White 522064001 V 2.25 25 Ea. 25 Ea. 25 Ea. M4
BF30-01-48^ 47-3/4" White 522068001 √ 2.74 25 Ea. 25 Ea. 25 Ea. M4
BF30-01-60^ 59-3/4" White 522092001 √ 3.24 25 Ea. 25 Ea. 25 Ea. M4
BF30-01-72^ 71-3/4" White 522120001 √ 3.78 25 Ea. 25 Ea. 25 Ea. M4
BF30-01-96^ 95-3/4" White 522148001 √ 4.81 25 Ea. 25 Ea. 25 Ea. M4
BF30-02-362^ 35-3/4" White 522316001 V 2.11 25 Ea. 25 Ea. 25 Ea. M4
Bracket Only BF30-10^ Top Pivot Bracket 2C 602 522236001 V 0.47 200 Ea. 200 Ea. 200 Ea. M4
2 Door BF30-22^
Snugger-2 Door 		522240001 V 0.27 200 Ea. 200 Ea. 200 Ea. M4
4 Door BF30-24^
Snugger-4 Door 		522244001 V 0.35 100 Ea. 100 Ea. 100 Ea. M4
BF30-25^
Slide Guide 		522372001 Stanley
National 		0.57 200 Ea. 200 Ea. 200 Ea. M4
В Bi-Fold T rack a nd Hardw are (con t.) Continued o n next page
Model Size Finish ВНМА EDP# Stock Item List Price Order
Multiple 		Box Oty Carton
Oty 		MPG
BF30-31^ Top Pivot 3/8" Hole Prep. 2C 602 522612001 √ 0.31 200 Ea. 200 Ea. 200 Ea. M4
BF30-32^
Guide Wheel 3/8"
Hole Prep. 		2C 602 522620001 √ 0.43 200 Ea. 200 Ea. 200 Ea. M4
BF30-33^
Bottom Pivot 3/8"
Hole Prep. 		2C 602 524212001 √ 0.30 200 Ea. 200 Ea. 200 Ea. M4
BF30-35^
Guide Wheel 7/16"
Hole Prep. 		2C 602 522280001 √ 0.53 200 Ea. 200 Ea. 200 Ea. M4
BF30-36^
Bottom Pivot 7/16"
Hole Prep. 		2C 602 523248001 √ 0.38 200 Ea. 200 Ea. 200 Ea. M4
BF30-81^
Jamb Bracket 3/4"
Screws 		2C 602 524200001 √ 0.46 200 Ea. 200 Ea. 200 Ea. M4
_ Bagset 2400 522017001 √ 2.57 100 Sets 100 Sets 100 Sets M4
Bagset 2405 522016001 2.57 100 Sets 100 Sets 100 Sets M4
Bagset 2453 522007001 √ 2.13 100 Sets 100 Sets 100 Sets M4
Bagset 2454 522011001 √ 1.93 100 Sets 100 Sets 100 Sets M4
Bagset 2455 522012001 2.84 100 Sets 100 Sets 100 Sets M4
Bagset 2568 523128001 3.83 100 Sets 100 Sets 100 Sets M4
BF50-01-48^
Aluminum Track 		47-7/8" Mill 402321001 √ 10.49 10 Ea. 10 Ea. 10 Ea. M4
BF50-01-60^ 59-7/8" Mill 402322001 √ 12.89 10 Ea. 10 Ea. 10 Ea. M4
BF50-01-72^ 71-7/8" Mill 402323001 √ 15.63 10 Ea. 10 Ea. 10 Ea. M4
BF50-01-96^ 96" Mill 402324001 √ 20.65 10 Ea. 10 Ea. 10 Ea. M4
BF50-01-120^ 120" Mill 402326001 √ 25.79 10 Ea. 10 Ea. 10 Ea. M4
BF50-01-144^ 144" Mill 402327001 33.87 10 Ea. 10 Ea. 10 Ea. M4
BF50-01-192^ 192" Mill 402328001 45.13 10 Ea. 10 Ea. 10 Ea. M4
BF50-11^
Pivot Bracket 		2C 602 402304001 0.74 200Ea 200Ea 200Ea. M4
BF50-22^
Snugger-2 Door 		402306001 0.51 100 Ea. 100 Ea. 100 Ea. M4
BF50-33^
Bottom Pivot 		2C 602 522276001 √ 0.66 200 Ea. M4
BF50-34s^ Top Pivot 7/16" Hole Prep. 522272001 √ 0.50 200 Ea. 200 Ea. 200 Ea. M4
050 BF50-41s
Hanger 		2C 602 402303001 √ 4.81 10 Ea. 10 Ea. 10 Ea. M4
BF50-61^
Plastic Knob 		Almond 521244001 0.25 100 Ea. 100 Ea. 100 Ea. M4
BF50-62^
Wood knob 		Unf.
Wood 		521280001 √ 0.36 100 Ea. 100 Ea. 100 Ea. M4
BF50-72^
Aligners 		2C 602 522224001 √ 0.42 100 Pr. 100 Pr. 100 Pr. M4
BF50-81^
Jamb Bracket with
Pivot Block with 3/4"
Screws 		2C 602 522252001 V 0.62 200 Ea. 200 Ea. 200 Ea. M4

( X) Item must be ordered in these increments. ^For orders having less than the order multiple quantity, add % (1.5 multiplier) to the net price.

В i-Fold T Frack a nd Hardw are (con t.) Continued o n next page
Model Size Finish ВНМА EDP# Stock Item List Price Order
Multiple 		Box Oty Carton
Oty 		MPG
BF50-83^
Floor Bracket 		2C 602 522264001 0.81 200 Ea. 200 Ea. 200 Ea. M4
BF50-84^
Heavy Duty Jamb
Bracket with 3/4"
Screws 		2C 602 523236001 0.66 200 Ea. 200 Ea. 200 Ea. M4
BF50-HDW^
Hardware Set
Set consists of:
1 ea. BF-50-11, 1 ea.
BF50-81, 1 ea. BF50-
34, 1 ea. BF50-33, 1
ea. BP250-99, and
BF50-25. 		402308001 V 3.17 10 Sets 10 Sets 10 Sets M4
BFC50-00-36^
2 Door Complete Poly Wrap
Packaged Sets
4 Door 2 door set consists
of: 1 ea.
BF50-01, BF50-11,
BF50-22, BF50-33,
BF50-34, BF50-41,
BF50-62, BF50-81, and
BP250-99.
Hinges Not Included 		36" Open-
ing 		402293001 √ 21.85 10 Sets 10 Sets 10 Sets M4
4 door set consists of:
1 ea. BF50-01, BF50-
24, 2 ea. BF50-11,
BF50-33, BF50-34,
BF50-41, BF50-62,
BF50-82, 1 pr. BF50-72
and BP250-99.
Hinges Not Included
BFC50-00-48^ 48" Open-
ing 		402294001 √ 32.34 10 Sets 10 Sets 10 Sets M4
BFC50-00-60^ 60" Open-
ing 		402295001 √ 35.08 10 Sets 10 Sets 10 Sets M4
BFC50-00-72^ 72" Open-
ing 		402296001 36.61 10 Sets 10 Sets 10 Sets M4
BFC50-00-96^ 96" Open-
ing 		402298001 √ 41.38 10 Sets 10 Sets 10 Sets M4
BF125-71
Floor Guide 		2C 602 402309001 √ 1.86 10 Ea. 10 Ea. 10 Ea. M4
BF125-91^
Aluminum Floor Track
Guide 		8' Mill 402310001 10.49 10 Ea. 10 Ea. 10 Ea. M4
BF125N-21
Snugger-2 Door 		524254001 0.58 100 Ea. 100 Ea. 100 Ea. M4
Top Pivot BF125N-31^
Top and Bottom
Pivot Set 		405302001 √ 21.22 10 Sets 10 Sets 10 Sets M4
Bottom Pivot
000 BF125N-41^
Hanger Set 		405301001 √ 16.94 10 Ea. 10 Ea. 10 Ea. M4

( X) Item must be ordered in these increments. ^For orders having less than the order multiple quantity, add \frac{1}{2} (1.5 multiplier) to the net price.

В i-Fold 1 Гrack а nd Hardw are (con t.)
Model Size Finish ВНМА EDP# Stock Item List Price Order
Multiple 		Box Qty Carton
Oty 		MPG
BFC125N-00-30
125 lb. Bifold Contrac-
tor Set-2 Door
Top Plvot 2 door set consists of:
1 ea. BP250N-01,
BF125N-21,
BF125N-41, BP250-99,
1 set BF125N-31, 3 ea.
741 3-1/2x3-1/2, and
741 4x4. 		30" Open-
ing 		405225 √ 49.12 1 Set 1 Set 1 Sets M4
10014400 BFC125N-00-36 36" Open-
ing 		405232 √ 51.30 1 Set 1 Set 1 Sets M4
BFC125N-02-48 48" Open-
ing 		405242 √ 57.86 1 Set 1 Set 1 Sets M4
Bottom Pivot BFC125N-04-48 125 lb. Bifold Contractor Set-4 Door 4 door set consists of: 1 ea. BP250N-01, BP250-99, 2\nea. BF125N-21, BF125N-41, 6 ea. 741 3-1/2x3-1/2, 741 4x4, and 2 sets BF125N-31. 48" Open-
ing 		405244 V 88.46 1 Set 1 Set 1 Sets M4
BFC125N-00-60 60" Open- 405254 √ 92.83 1 Set 1 Set 1 Sets M4
BFC125N-00-72 72" Open- 405264 √ · 99.38 1 Set 1 Set 1 Sets M4
2 65 BFC125N-00-96 96" Open-
ing 		405284 √ 109.22 1 Set 1 Set 1 Sets M4
(h) 214-SC
Screws For 224/234
Hinge 		8"x5/8" Brass-
tone 		521000001 0.21 300 Sets 300 Sets 300 Sets M4
(4) 214-121SC
Self Drilling Screws
for 224/234 Hinges 		8"x5/8" Brass-
tone 		521004001 0.42 300 Sets 300 Sets 300 Sets M4
(+) 220-121SC
Drill Point Screws For
220 Hinge 		6"x7/8" Brass-
tone 		521024001 0.42 600 Sets 600 Sets 600 Sets M4
0000 220-3^
Non Mortise Hinge
with Inline Holes w/
Screws 		3" Brass-
tone 		521012001 √ 0.82 300 Pr. 300 Pr. 300 Pr. M4
220-3LS^
Non Mortise Hinge
with Inline Holes,
Less Screws 		3" Brass-
tone 		521016001 V 0.60 300 Pr. 300 Pr. 300 Pr. M4
221-3^ Non Mortise Hinge with Offset Holes, Less Screws 3" Brass-
tone 		521032001 √ 0.60 300 Pr. 300 Pr. 300 Pr. M6
(F) 221-SC^ Screws for 220-3/221-3 Hinges 6"x7/8" Brass-
tone 		521040001 0.25 600 Sets 600 Sets 600 Sets M6
0 0 224^
Flatback Hinge, Less
Screws 		2-1/2"x1-
5/8" 		Satin-
Brass 		521052001 0.62 300 Pr. 300 Pr. 300 Pr. M4
0 0 234^
Flatback Hinge, Less
Screws 		2-1/2"x1-
5/8" 		2C 602 521076001 0.43 300 Pr. 300 Pr. 300 Pr. M4
Carton Otty 10 Sets 10 Sets 10 Sets-Set 10 Sets-Set 10 Sets-Set MPG
10 Sets 10 Sets-Set 10 Sets-Set
10 Sets-
Set
10 Sets-
Set
Set 10 Sets- Set
Set
10 Sets
6 Sets M4
6 Sets M4
6 Sets M4
6 Sets M4
100 Ea. M4
100 Ea. M4
50 Pr. M4
50 Pr. M4
50 Pr. M4
50 Pr. M4
10 Sets M4
10 Sets M4
10 Sets M4
10 Sets M4
10 Sets M4
6 Sets 6 Sets 6 Sets 100 Ea. 100 Ea. 50 Pr. 50 Pr. 50 Pr. 10 Sets 10 Sets 10 Sets 10 Sets

( X) Item must be ordered in these increments. A For orders having less than the order multiple quantity, add ½ (1.5 multiplier) to the net price.

В yPass 1 Frack a nd Hardware (con t.) Continued o n next page
Model Size Finish внма EDP# Stock
Item 		List Price Order
Multiple 		Box Qty Carton
Oty 		MPG
BPC60A-00-60
Complete Set with
Slot Adjust Hangers
and BP75-02Track 		59" Open-
ing 		403021001 V 12.78 10 Sets 10 Sets 10 Sets M4
BPC60A-00-72
Complete Set with
Slot Adjust Hangers
and BP75-02Track 		71" Open-
ing 		403022001 √ 14.20 10 Sets 10 Sets 10 Sets M4
BPD60-00-48 Complete Set with Slot Adjust Hangers and BP75-03 Track Set consists of: 1 ea. BP75-03, BP150-71, BP60-41, 1pr. BP60-42, and 2 ea. BP150-61 47" Open-
ing 		403140 √ 10.93 6 Sets 6 Sets 6 Sets M4
BPD60-00-60 59" Open-
ing 		403150 √ 12.19 6 Sets 6 Sets 6 Sets M4
0 BPD60-00-72 71" Open- 403160 √ 13.11 6 Sets 6 Sets 6 Sets M4
BPD60-00-96 95" Open-
ing 		403180 √ 18.39 6 Sets 6 Sets 6 Sets M4
BPD60A-00-48 Complete Set with Dial Adjust Hangers and BP75-02 Track Set consists of: 1 ea. BP75-02, BP150- 71, 1 pr. BP60-42, BP150-71, 1 pr. BP60- 41, and 2 ea. BP150-61 47" Opening 403240001 V 13.29 6 Sets 6 Sets 10 Sets M4
BP75-HDW-1
(8100BX) Hardware
Bagset 		541036001 √ 4.15 10 Sets 10 Sets 10 Sets
BP75-01-48s^
Steel Double Track 		46-1/2" Galv. 541416001 √ 3.72 10 Ea. 10 Ea. 10 Ea. M4
BP75-01-60^ 58-1/2" Galv. 541420001 √ 4.59 10 Ea. 10 Ea. 10 Ea. M4
BP75-01-72^ 70-1/2" Galv. 541424001 √ 5.46 10 Ea. 10 Ea. 10 Ea. M4
BP75-01-96^ 93-1/2" Galv. 541436001 √ 7.21 10 Ea. 10 Ea. 10 Ea. M4
BP75-01-120^ 120" Galv. 541444001 √ 9.29 10 Ea. 10 Ea. 10 Ea. M4
BP75-02-48^
Aluminum Double
Track 		46-3/8" Mill 541232001 √ 5.57 10 Ea. 10 Ea. 10 Ea. M4
BP75-02-60^ 58-3/8" Mill 541236001 √ 6.88 10 Ea. 10 Ea. 10 Ea. M4
BP75-02-72^ 70-3/8" Mill 541240001 √ 9.40 10 Ea. 10 Ea. 10 Ea. M4
BP75-02-96^ 93-3/8" Mill 541248001 √ 12.35 10 Ea. 10 Ea. 10 Ea. M4
BP75-02-144^ 144" Mill 541264001 √ 20.54 10 Ea. 10 Ea. 10 Ea. M4
BP75-03-48^
Steel Double Track 		46-3/8" Galv. 593096001 √ 3.17 10 Ea. 10 Ea. 10 Ea. M4
BP75-03-60^ 58-3/8" Galv. 593100001 √ 3.50 10 Ea. 10 Ea. 10 Ea. M4
BP75-03-72^ 70-3/8" Galv. 593104001 √ 4.26 10 Ea. 10 Ea. 10 Ea. M4
ByPass Track and Hardware (cont.) Continued on next page Stock Liet Price Order Roy Oty Carton MDC
Model Size Finish внма EDP# Stock
Item 		List Price Order
Multiple 		Box Qty Carton
Oty 		MPG
-1]- BP75-07-48^
Aluminum Double
Track 		46-7/8" Mill 541368001 9.62 10 Ea. 10 Ea. 10 Ea. M4
BP75-07-60^ 58-7/8" Mill 541372001 12.13 10 Ea. 10 Ea. 10 Ea. M4
BP75-07-72^ 70-7/8" Mill 541376001 14.42 10 Ea. 10 Ea. 10 Ea. M4
BP75-43^
Twin Wheel Hanger 		2C 602 541296001 1.86 50 Pr. 50 Pr. 50 Pr. M4
© 3 0
[]] 		BP75-45^
Twin Wheel Hanger 		2C 602 541304001 √ 1.62 50 Pr. 50 Pr. 50 Pr. M4
BP75-76^
Center Stop for BP75
Tracks 		2C 602 403998001 V 3.33 20 Ea. 20 Ea. 20 Ea. M4
0 BP150-61^
Finger Pull 		Bright-
Brass 		521224001 √ 0.19 200 Ea. 200 Ea. 200 Ea. M4
BP150-62^
Finger Pull 		3/4" Brushed
Nickel 		521233001 0.20 200 Ea. 200 Ea. 200 Ea. M4
BP150-71^
Adjustable Floor
Guide 		Zinc/
White 		541008001 V 0.94 50 Ea. 50 Ea. 50 Ea. M4
A A BP150-72^
Floor Guide 		White 541020001 √ 0.81 100 Ea. 100 Ea. 100 Ea. M4
BP150-73^
Floor Guide 		White 541000001 √ 0.36 100 Ea. 100 Ea. 100 Ea. M4
BP150-74^
Carpet Riser 		2C 602 541016001 √ 0.63 50 Ea. 50 Ea. 50 Ea. M4
BP150-75^
Adjustable Floor
Guide 		Zinc/
White 		541012001 √ 0.63 50 Ea. 50 Ea. 50 Ea. M4
959
BP150N-41^
Hanger 		Brass-
Tone 		405304001 √ 6.23 20 Pr 20 Pr 20 Pr. M4
000 BP150N-HDW^
Hardware Set
Set consists of:
1 ea. BP250-71,
BP250-99,
and 2 pr. BP150N-41 		405860001 √ 16.23 10 Sets 10 Sets 10 Sets M4
В SyPass T rack ar nd Hardware e (con t.) Continued o n next page
Model Size Finish ВНМА EDP# Stock
Item 		List Price Order
Multiple 		Box Qty Carton
Oty 		MPG
BPC150N-00-48 150 lb. By Pass Contractor Set Set consists of: 2 ea. BP250N-01, 1 pr. TR250-00, 2 pr. BP150N-41, 1\nea. BP250-71, and BP250-99. 48" Open-
ing 		405664 V 32.73 1 Set 1 Set 6 Sets M4
5 65 BPC150N-00-60 60" Open-
ing 		405665 √ 37.10 1 Set 1 Set 6 Sets M4
BPC150N-00-72 72" Open-
ing 		405666 √ 40.38 1 Set 1 Set 6 Sets M4
BPC150N-00-96 96" Open-
ing 		405668 √ 48.03 1 Set 1 Set 6 Sets M4
(Ind) BP250-00^
(TR250) Track Spacer 		405306001 √ 0.49 20 Pr. 20 Pr. 20 Pr. M4
BP250-61^
Round Flush Pull 		2-1/8" Bright-
Brass 		521228001 √ 0.71 20 Ea. 20 Ea. 20 Ea. M4
BP250-62^
Round Flush Pull 		2-1/8" Antique-
Brass 		521240001 0.95 100 Ea 100 Ea 100 Ea. M4
BP150-63^
Finger Pull 		2 1/8" Brushed
Nickel 		521243001 0.70 200 Ea. 200 Ea. 200 Ea. M4
BP250-71^
Adjustable Floor
Guide 		2C 602 403534001 V 2.99 50 Ea 50 Ea 50 Ea. M4
o q BP250-75^
Angle Stop 		2C 602 541004001 √ 0.66 100 Ea. 100 Ea. 100 Ea. M4
Qq. BP250-77
Center Stop for
BP150N-01 Track 		2C 602 400004001 √ 2.79 20 Ea. 20 Ea. 20 Ea. M4
5_B BP250-99^
Adjusting Wrench 		2C 602 522232001 √ 0.20 400 Ea. 400 Ea. 400 Ea. M4
000 BP250N-41
Hanger 		405305001 √ 28.85 10 Pr. 10 Pr. 10 Pr. M4
000 BP250N-HDW^
Hardware Set
Set consists of:
2 pr. BP250N-41, 1
ea. BP250-71, and
BP250-99. 		405790001 √ 33.85 1 Set 1 Set 6 Sets M4
BP250N-01-48^
AluminumTrack
Order 2 pieces per
opening 		48" 405102001 √ 7.43 10 Ea. 10 Ea. 10 Ea. M4
• BP250N-01-60^ 60" 405103001 √ 9.07 10 Ea. 10 Ea. 10 Ea. M4
BP250N-01-72^ 72" 405104001 √ 10.49 10 Ea. 10 Ea. 10 Ea. M4
BP250N-01-96^ 96" 405105001 √ 14.42 10 Ea. 10 Ea. 10 Ea. M4
BP250N-01-120^ 120" 405106001 √ 18.25 10 Ea. 10 Ea. 10 Ea. M4
BP250N-01-144^ 144" 405107001 √ 21.64 10 Ea. 10 Ea. 10 Ea. M4
BP250N-01-192^ 192" 405108001 √ 29.29 10 Ea. 10 Ea. 10 Ea. M4
1277 BP250N-02-48^
Aluminum Fascia for
BP250N-01 Track 		48" 405200001 √ 14.64 10 Ea. 10 Ea. 10 Ea. M4
BP250N-02-60^ 60" 405201001 √ 18.14 10 Ea. 10 Ea. 10 Ea. M4
BP250N-02-72^ 72" 405202001 √ 21.09 10 Ea. 10 Ea. 10 Ea. M4
BP250N-02-96^ 96" 405203001 √ 28.74 10 Ea. 10 Ea. 10 Ea. M4
BP250N-02-120^ 120" 405204001 36.39 10 Ea. 10 Ea. 10 Ea. M4

(X) Item must be ordered in these increments. For orders having less than the order multiple quantity, add ½ (1.5 multiplier) to the net price.

STANLEY Sliding & Folding Hardware

ByPass Track and Hardware (cont.)
Model Size Finish ВНМА EDP# Stock
Item 		List Price Order
Multiple 		Box Qty Carton
Oty 		MPG
Hanger
250 lb. By Pass Con-
tractor Set
Set consists of:
2 ea. BP250N-01,
1 pr. TR250-00, 2
pr. BP250N-41, 1
ea. BP250-71, and
BP250-99. 		60" Open-
ing 		405750 √ 102.66 1 Set 1 Set 6 Sets M4
2 65 BPC250N-00-72 72" Open-
ing 		405760 √ 108.13 1 Set 1 Set 6 Sets M4
BPC250N-00-96 96" Open-
ing 		405780 √ 121.24 1 Set 1 Set 6 Sets M4
Pocl ket Doo r Trac k, Hardware and Fr ames Continued or n next page
Model Size Finish внма EDP# Stock
Item 		List Price Order
Multiple 		Box Qty Carton
Oty 		MPG
0 BP150-61^
Finger Pull 		Bright-
Brass 		521224001 √ 0.19 200 Ea. 200 Ea. 200 Ea. M4
0 0 BP150N-41^
Hanger 		Brass-
Tone 		405304001 √ 6.23 20 Pr 20 Pr 20 Pr. M4
BP250-61^
Round Flush Pull 		2-1/8" Bright-
Brass 		521228001 √ 0.71 20 Ea. 20 Ea. 20 Ea. M4
BP250-62^
Round Flush Pull 		2-1/8" Antique-
Brass 		521240001 0.95 100 Ea 100 Ea 100 Ea. M4
0 0 0 BP250N-41
Hanger 		405305001 √ 28.85 10 Pr. 10 Pr. 10 Pr. M4
AP 3 PD75-00-36 75Lb. Track and Hardware Set Set consists of: 1 ea. PD75-01, PD250-77, BP250-99, 1 pr. BP75-41, and 2 ea. PD250-71 403903 √ 11.29 6 Sets 6 Sets 6 Sets
PD150N-HDW Hardware Set Set consists of: 1 pr. BP150N-41, 1 ea. PD250-74, PD250-77, and BP250-99. 1-3/8 door guide only. Provide PD250-71 for all others (40-3530). 405845001 √ 7.50 10 Sets 10 Sets 10 Sets M4
PDC150N-00-36 150 lb.Track and Hardware Contractor Set Set consists of: 1 ea. PD150-01-72, PD250-77, BP250-99, 1 pr. BP150N-41, and 2\nea. PD250-71. 405843 37.10 1 Set 1 Set 1 Set M4
£ PDC150N-00-48 405844 44.75 1 Set 1 Set 1 Set M4
PDFC150N-00-68 Pocket Door Frame and Hardware Set consists of: 1 ea. PDF250N-01, PD250-77, BP250-99, 1 pr. BP150N-41, 1 set PDP250-51, 2 ea. PD250-71, and 9-57 3'0"x6'8"
Opening 		403925 √ 111.24 1 Set 1 Set 1 Set M4
5-63 PDFC150N-00-70 3'0"x7'0"
Opening 		405940001 √ 117.96 1 Set 1 Set 1 Set M4
เทเท PDFC150N-00-80 3'0"x8'0"
Opening 		405942001 √ 126.70 1 Set 1 Set 1 Set M4
PD250-62
Pocket Door Privacy
Latch 		3-3/4" 404040 11.97 1 Ea. 5 Ea. 5 Ea. M4
PD250-71^
Bottom Guide 		White 403530001 √ 1.39 100 Ea 100 Ea 100 Ea. M4
Pocket [ oor Tr ack, H ardware an d Fram es (con t.)
Model Size Finish внма EDP# Stock
Item 		List Price Order
Multiple 		Box Oty Carton
Oty 		MPG
- P PD250-72s^
Door Guide for 1-3/4"
Doors 		2C 602 403997001 √ 2.08 50 Ea. 50 Ea. 50 Ea. M4
o o PD250-74s^
Door Guide for 1-3/8"
Doors 		2C 602 403993001 √ 0.72 50 Ea. 50 Ea. 50 Ea. M4
-0 PD250-77^
Bumper Stop 		403969001 √ 0.16 100 Ea. 100 Ea. 100 Ea. M4
PD250-95-97^ 97-3/4" PS 403965001 10.00 20 Pr. 20 Pr. 20 Pr. M4
PD250-96^
Jamb Stiffener 		81-3/4" PS 403965001 5.19 20 M4
PD250-98^
Jamb Spacer 		403996001 √ 0.33 100 Ea. 100 Ea. 100 Ea. M4
PD250N-01-47^
Pocket Door Aluminum Track 		46-7/8" 405109001 √ 7.43 10 Ea. 10 Ea. 10 Ea. M4
• PD250N-01-55^ 54-7/8" 405110001 √ 8.34 10 Ea. 10 Ea. 10 Ea. M4
PD250N-01-59^ 58-7/8" 405111001 V 9.07 10 Ea. 10 Ea. 10 Ea. M4
PD250N-01-63^ 62-7/8" 405112001 √ 9.48 10 Ea. 10 Ea. 10 Ea. M4
PD250N-01-71^ 70-7/8" 405113001 √ 10.49 10 Ea. 10 Ea. 10 Ea. M4
PD250N-01-95^ 94-7/8" 405114001 √ 14.42 10 Ea. 10 Ea. 10 Ea. M4
PD250N-01-120^ 120" 405106001 √ 18.25 10 Ea. 10 Ea. 10 Ea. M4
PD250N-01-144^ 144" 405107001 √ 21.64 10 Ea. 10 Ea. 10 Ea. M4
PD250N-01-192^ 192" 405108001 √ 29.29 10 Ea. 10 Ea. 10 Ea. M4
PDF250N-05s^
Bi-Parting Bracket
Inc. gal. nails & 4 ea.
BP250-77 stops 		405960001 V 23.82 1 Set 1 Set 10 Set M4
PDFC250N-00-80 Pocket Door Frame and Hardware Set consists of: 1 ea. PDF250N-01, PD250-77, BP250-99, 1 pr. BP150N-41, 1 set PDF250-51, 2 ea. PD250-71, and 9-57 4'0"x8'0"
Opening 		405950001 V 166.04 1 Set 1 Set M4

EDP Number to Class Number Cross Reference

EDP Number Class Number Size Finish UPC# Page
402025 BF30-00-30 30" Opening 6
402032 BF30-00-36 36" Opening 6
402044 BF30-00-48 48" Opening 6
402054 BF30-00-60 60" Opening 6
402064 BF30-00-72 72" Opening 6
403040 BP60-00-48 47" Opening 10
403050 BP60-00-60 59" Opening 10
403060 BP60-00-72 71" Opening 10
403080 BP60-00-96 95" Opening 10
403140 BPD60-00-48 47" Opening 11
403150 BPD60-00-60 59" Opening 11
403160 BPD60-00-72 71" Opening 11
403180 BPD60-00-96 95" Opening 11
403903 PD75-00-36 15
403925 PDFC150N-00-68 3'0"x6'8"
Opening 		15
404040 PD250-62 3-3/4" 15
405225 BFC125N-00-30 30" Opening 9
405232 BFC125N-00-36 36" Opening 9
405242 BFC125N-02-48 48" Opening 9
405244 BFC125N-04-48 48" Opening 9
405254 BFC125N-00-60 60" Opening 9
405264 BFC125N-00-72 72" Opening 9
405284 BFC125N-00-96 96" Opening 9
405664 BPC150N-00-48 48" Opening 13
405665 BPC150N-00-60 60" Opening 13
405666 BPC150N-00-72 72" Opening 13
405668 BPC150N-00-96 96" Opening 13
405750 BPC250N-00-60 60" Opening 14
405760 BPC250N-00-72 72" Opening 14
405780
405843 		BPC250N-00-96
PDC150N-00-36 		96" Opening 14
15
405844 PDC150N-00-48 15
400004001 BP250-77 2C 887838078643 13
402293001 BFC50-00-36 36" Opening 887838096494 8
402294001 BFC50-00-48 48" Opening 887838096500 8
402295001 BFC50-00-60 60" Opening 887838096517 8
402296001 BFC50-00-72 887838096524 8
402298001 BFC50-00-96 887838096531 8
402303001 BF50-41s 2C 887838096470 7
402304001 BF50-11 2C 887838096333 7
402306001 BF50-22 887838096340 7
402308001 BF50-HDW 887838096487 8
402309001 BF125-71 2C 887838078650 8
402310001 BF125-91 8
402321001 BF50-01-48 47-7/8" Mill 887838096296 7
402322001 BF50-01-60 59-7/8" Mill 887838096302 7
402323001 BF50-01-72 71-7/8" Mill 887838096319 7
402324001 BF50-01-96 96" Mill 887838096326 7
402326001 BF50-01-120 120" Mill 887838096371 7
402327001 BF50-01-144 144" Mill
Mill 		887838096456
887838096463 		7
402328001
403006001 		BF50-01-192
BPC60-00-48 		192"
47" Opening 		887838096616 7
10
403008001 BPC60-00-60 59" Opening 887838096623 10
403010001 BPC60-00-72 71" Opening 887838096630 10
EDP Number Class Number Size Finish UPC# Page
403012001 BPC60-00-96-
2DRSET 		95" Opening 887838078674 10
403020001 BPC60A-00-48 887838078681 10
403021001 BPC60A-00-60 887838078698 11
403022001 BPC60A-00-72 887838078704 11
403240001 BPD60A-00-48 47" Opening 887838078711 11
403250001 BPD60A-00-60 59" Opening 887838096685 11
403260001 BPD60A-00-72 71" Opening 887838096692 11
403530001 PD250-71 White 887838078735 15
403534001 BP250-71 2C 887838078742 13
403966001 PD250-96 81-3/4" PS 887838078773 16
403969001 PD250-77 887838078797 16
403993001 PD250-74s 887838078803 16
403996001 PD250-98 887838078810 16
403997001 PD250-72s 2C 887838078827 16
403998001 BP75-76 2C 887838078834 12
405102001 BP250N-01-48 48" 887838078841 13
405103001 BP250N-01-60 60" 887838078858 13
405104001 BP250N-01-72 72" 887838078865 13
405105001 BP250N-01-96 96" 887838078872 13
405106001 BP250N-01-120 120" 887838078889 13
405107001
405108001 		BP250N-01-144
BP250N-01-192 		144"
192" 		887838078896
887838078902 		13
13
405109001 PD250N-01-47 16
405110001 PD250N-01-55 16
405111001 PD250N-01-59 16
405112001 PD250N-01-63 16
405113001 PD250N-01-71 16
405114001 PD250N-01-95 16
405200001 BP250N-02-48 48" 887838078964 13
405201001 BP250N-02-60 60" 887838078971 13
405202001 BP250N-02-72 72" 887838078988 13
405203001 BP250N-02-96 96" 887838078995 13
405204001 BP250N-02-120 13
405301001 BF125N-41 887838079084 8
405302001 BF125N-31 887838079091 8
405304001 BP150N-41 BrassTone 887838079107 12
405304001 BP150N-41 BrassTone 887838079107 15
405305001 BP250N-41 887838079114 15
405306001 BP250-00 (TR250) 887838079121 13
405790001 BP250N-HDW 887838079183 13
405845001 PD150N-HDW 887838079213 15
405860001 BP150N-HDW 3'0"x7'0" 887838079220 12
405940001 PDFC150N-00-70 Opening 887838079237 15
405942001 PDFC150N-00-80 3'0"x8'0"
Opening 		887838079244 15
405950001 PDFC250N-00-80 4'0"x8'0"
Opening 		887838079251 16
405960001 PDF250N-05s 887838096920 16
521000001 214-SC 8x5/8 Brasstone 887838082244 9
521004001 214-121SC 8x5/8 Brasstone 887838082251 9
521012001 220-3 3 Brasstone 887838082268 9
521016001 220-3LS 3 Brasstone 887838082275 9
521024001 220-121SC 6x7/8 Brasstone 887838082282 9
521032001 221-3 3 Brasstone 887838082299 9
521040001 221-SC 6x7/8 Brasstone 887838082305 9
521052001 224 2-1/2x1-5/8 SatinBrass 887838082312 9

EDP Number to Class Number Cross Reference

EDP Number Class Number Size Finish UPC# Page
521076001 234 2-1/2x1-5/8 2C 887838082336 9
521224001 BP150-61 BrightBrass 887838082343 12
521224001 BP150-61 BrightBrass 887838082343 15
521228001 BP250-61 2-1/8" BrightBrass 887838082350 13
521228001 BP250-61 2-1/8" BrightBrass 887838082350 15
521233001 BP150-62 ¾" Brushed
Nickel 		12
521240001 BP250-62 2-1/8" AntiqueBrass 887838082367 13
521240001 BP250-62 2-1/8" AntiqueBrass 887838082367 15
521243001 BP250-63 2 1/8" Brushed 13
521244001 BF50-61 Nickel
Almond 		887838096388 7
521276001 PD250-64 2-3/4" x 1 887838082381 14
521280001 BF50-62 15/16" Unf.Wood 887838096395 7
522004001 BF30-01-24 23-3/4" White 887838096012 6
522007001 2453 887838096289 7
522011001 2454 887838082398 7
522012001 2455 887838082404 7
522016001 2405 887838082411 7
522017001 2400 887838082428 7
522032001 BF30-01-30 29-3/4" White 887838096036 6
522060001 BF30-01-362 35-3/4" White 887838096050 6
522064001 BF30-01-364 35-3/4" White 887838096067 6
522068001 BF30-01-48 47-3/4" White 887838096074 6
522092001 BF30-01-60 59-3/4" White 887838096081 6
522120001 BF30-01-72 71-3/4" White 887838096098 6
522148001 BF30-01-96 95-3/4" White 887838096111 6
522224001 BF50-72 2C 887838096418 7
522232001 BP250-99 2C 887838082435 13
522236001 BF30-10 2C 887838096166 6
522240001 BF30-22 887838096173 6
522244001 BF30-24 887838096180 6
522252001 BF50-81 2C 887838096425 7
522264001
522272001 		BF50-83
BF50-34s 		2C 887838096432
887838096364 		8
7
522276001 BF50-33 2C 887838096357 7
522280001 BF30-35 2C 887838096234 7
522284001 BF30-02-24 23-3/4" White 887838096128 6
522316001 BF30-02-362 35-3/4" White 887838096142 6
522372001 BF30-25 887838096197 6
522528001 2385 887838096272 7
522612001 BF30-31 2C 887838096203 7
522620001 BF30-32 2C 887838096210 7
523128001 2568 887838082459 7
523236001 BF50-84 2C 887838096449 8
523248001 BF30-36 2C 887838096241 7
524200001 BF30-81 2C 887838096258 7
524208001 BF20-31 2C 887838095930 6
524212001 BF30-33 2C 887838096227 7
524236001 BF20-10 2C 887838095923 6
524254001 BF125N-21 887838082466 8
524452001 BF25-31 2C 887838095947 6
541000001 BP150-73 White 887838082480 12
541004001 BP250-75 2C 887838082497 13
541008001 BP150-71 Zinc/White 887838082503 12
541012001
541016001 		BP150-75
BP150-74 		Zinc/White
2C 		887838082510
887838082527 		12
12
541020001 BP150-72 White 887838082534 12
541024001
BP60-41
10
2C
887838096593
541028001
BP60-42
10
2C
887838082541
541036001
BP75-HDW-1
11
887838096708
BP60-HDW
541100001
10
(8400BX)
BP60-HDW-2
541116001
10
(8401-BX)
541232001
BP75-02-48
46-3/8"
11
Mill
887838096722
541236001
BP75-02-60
58-3/8"
11
Mill
887838096739
541240001
BP75-02-72
70-3/8"
11
Mill
887838082589
BP60-HDW-3
541248001
10
887838082596
(8900-BX)
BP60-HDW-3
541252001
10
(8900-BX)
541264001
BP60-43
10
2C
887838082619
541268001
BP60-43
10
2C
887838082626
541272001
BP60-44
10
2C
887838096609
541280001
BP60-45
10
2C
541284001
BP60-45
10
2C
887838082640
541288001
BP60-46
10
2C
887838082657
BP60-HDW-5
541292001
10
(8902-BX)
541296001
BP75-43
12
2C
887838082671
541304001
BP75-45
12
2C
887838082688
541368001
BP75-07-48
46-7/8"
12
Mill
887838082718
541372001
BP75-07-60
58-7/8"
Mill
887838082725
12
541376001
BP75-07-72
70-7/8"
12
Mill
887838082732
541416001
BP75-01-48s
46-1/2"
11
Galv.
887838082770
541420001
BP75-01-60
58-1/2"
11
Galv.
887838082787
541424001
BP75-01-72
70-1/2"
11
Galv.
887838082794
541436001
BP75-01-96
93-1/2"
Galv.
887838082817
11
541444001
BP75-01-120
120"
11
Galv.
887838082824
593096001
BP75-03-48
46-3/8"
11
Galv.
887838096746
593100001
BP75-03-60
58-3/8"
11
Galv.
887838096753
593104001
BP75-03-72
70-3/8"
11
Galv.
887838096760 		EDP Number Class Number Size Finish UPC# Page

QUOTING & ORDERING

Price quotations are based on one (1) shipment to one (1) location, and are valid as identified in the quote but in no case longer than one year from the date of the quote. All exceptions will be evaluated on an individual basis.

All quotation requests will be provided by the dormakaba USA Inc. ("dormakaba USA") Representative where the project is located.

QUOTING PROCESS AND PROCEDURES: The following information is necessary to secure a price quotation from dormakaba USA.

  • Distributor Name
  • Distributor Location
  • Distributor Contact Name and Phone Number
  • Distributor e-mail contact
  • Project Name
  • Project Location
  • Bid Date
  • Architects Name, Phone Number and Architects Location
  • Specification Writer Name, Phone Number and Location
  • Competitive Influence / Specification
  • List of materials to be quoted

Every attempt will be made by dormakaba USA to provide the price quotation in a timely manner. Upon completion, you will receive a copy of the quotation which will also include a valid quotation number. Once the project is secured, a copy of the quotation must accompany your purchase order and be forwarded to dormakaba USA Customer Service Department in Indianapolis for processing.

NON-STANDARD PRODUCT REQUEST: Please contact your dormakaba USA Representative to complete a Non-Standard Product Request Form.

All requests should be submitted to the following email address: Email: product.request.us@dormakaba.com

Upon receipt of a special order request, dormakaba USA will review the configuration and determine if dormakaba USA is capable of making the special order product and will provide a response to the customer. If dormakaba USA is able to make the special order product, dormakaba USA will provide a specific sku/configuration to the customer for the special order product. This sku/configuration must be identified on all Purchase Orders. In addition, the Purchase Order must be marked as a "Special Order".

ORDERING: The following information is required for dormakaba USA to successfully process any order:

  • Itemized Purchase Order (PO)
  • dormakaba USA Approved Quote

Please send all orders to BAS-orderentry.us@dormakaba.com or by fax to 877-835-1030

NOTE: For detailed information on how to place an order for dormakaba USA products as well as BEST masterkey services please see the detailed section regarding "Best Ordering".

ADD ON ORDERS FOR QUOTED PROJECTS: To place an add-on order from a quoted project the Distributor must include the original quote, PO number and/or dormakaba USA's original order number. Add-On orders will be accepted for a period one (1) year from the original order date. Add-On orders received that are outside of the aforementioned period will be forwarded to the dormakaba USA Representative for re-quote.

STOCKING ORDERS: All orders for stock replenishment should be marked as "Stock" and indicate a "Ship To" address that coincides with the stocking Distributor warehouse location.

INCOMPLETE ORDER PROCESS: All orders are screened upon receipt for complete information. If an order is received incomplete, dormakaba USA Customer Service will make one (1) attempt to contact a Distributor directly for the missing requirements. If the information is not made available to dormakaba USA at that time the order will be referred to the local dormakaba USA Representative for resolution. All incomplete orders will be cancelled if not resolved after fourteen (14) calendar days.

PRICE DISCREPANCY PROCESS: All entered orders are reviewed by dormakaba USA Customer Service for accuracy and pricing consistency between the Distributor and dormakaba USA. Any order determined by dormakaba USA, in its sole and absolute discretion, to have a value greater than the Total Price shown on the Distributor purchase order will be held by dormakaba USA for a Price Discrepancy. dormakaba USA quotes are also reviewed to ensure that they are complete, approved, and match the PO. Due to pricing sensitivity, all price discrepancies must be resolved exclusively by your dormakaba USA Representative.

ORDER CANCELLATION/CHANGES: All requests for Order Cancellations and Changes (Quantity, Shipping, Finish, Function, etc) should be sent directly to dormakaba USA Customer Service. Requests via phone will be accepted, but must be accompanied by a written request. Factory Order Number, PO Number, Account Info, and Detailed Changes must be clearly indicated. Change requests can be submitted via the following methods:

Email: BAS-cshelp.us@dormakaba.com Fax: 1-877-835-1030

All order cancellations or changes will be subject to a cancellation fee as defined in dormakaba USA's Terms and Conditions of Sale.

PRODUCTION SCHEDULING AND "DO NOT SHIP BEFORE" REQUESTS: All orders are scheduled for production and shipping based on current production lead times and availability. Scheduling is completed

only when an order is released from both credit and pricing review.

Exceptions to this policy are made only when the PO is clearly marked: "Do Not Ship Before" followed by the date. (Required Date, Expected Date, etc. do not apply) These orders will be scheduled to ship on or after the date listed.

QUOTING & ORDERING (continued)

Changes to "Do Not Ship Before" dates are required in writing and should be sent to: BAS-cshelp.us@dormakaba.com.

Be advised, orders not clearly marked with a "Do Not Ship Before" designation will be payable within normal terms from the actual shipment date.

EXPEDITE REQUESTS:

  • Expedite requests will be reviewed and accommodated by dormakaba USA based on production lead times and availability. Email : BAS-expediterequest.us@dormakaba.com
  • See the then current dormakaba USA Quick Ship Program for details.

WHOLESALE PURCHASE: Distributors are also free to utilize dormakaba USA's Authorized Wholesalers to purchase product. dormakaba USA does not make any guarantee of availability or pricing for purchases from an Authorized Wholesaler and the discounts afforded to Distributor by dormakaba USA shall not apply to purchases from an Authorized Wholesaler. The terms and conditions and price of product shall be as mutually agreed between Distributor and Wholesaler.

RETURNED AUTHORIZATION (RA)

RA REQUESTS: A Return Authorization Form ("RA") must be utilized to return defective products still under warranty or products deemed repairable by dormakaba USA Inc. ("dormakaba USA"). All products returned to dormakaba USA must have a correct Return Authorization (RA) number applied to the outside of the shipping carton. All products must be returned within sixty (60) calendar days of RA issue date. This process can take up to seven (7) days after product is received at dormakaba USA's factory. If a defective product presents a security risk, an advance replacement may be requested.

RA PROCESS: Requests for warranty related returns can be initiated by submitting an e-mail to

BAS-rgacreditgrp.us@dormakaba.com.

The RA Request Form must be completed entirely to process an RA. The following information will be needed:

  • End User Name Sales Order Number
  • Account Number Item Number
  • Contact Name Item Quantity
  • Phone Number Description of the Problem
  • Purchaser Order Number
  • 1. Upon review and approval of the submitted RA request, a claim number is logged and provided back to the requestor by a dormakaba USA Team member.
  • 2. Once a claim number is issued, this number should be noted on all references and communications regarding the applicable situation to ensure a claim is easily identified.
  • 3. Defective product should be returned to the address below. The shipment must be marked with the approved RA claim number to ensure prompt processing and attention. All shipping charges prepaid by customer.

dormakaba USA Inc. Attn: Returns Department 6161 East 75th Street Indianapolis, IN 46250

  • 4. When material is received at dormakaba USA's factory, dormakaba USA will assess and determine the nature of the defect.
  • 5. Defective goods are replaced upon dormakaba USA's determination.
  • 6. Credit for material and freight is issued only if deemed appropriate by dormakaba USA. If approved, credit is initiated and a credit memo is mailed to the Distributor within fifteen (15) business days.

PURCHASE ORDERS:

A Purchase Order (PO) will be required if the Product is:

  • 1. Defective and not under warranty, or
  • 2. An advance replacement is required without verification of whether the product is defective and under warranty.

Please send Purchase Orders to the following:

  • Preferred Method e-mail:
    • BAS-rgacreditgrp.us@dormakaba.com
  • Fax: 1-877-835-1030

RETURNED AUTHORIZATION (RA) NON-WARRANTY FULFILLMENT ISSUES

RA POLICY: A Return Authorization Form ("RA") must be utilized to return products that are not defective and otherwise in a resalable condition. Only goods with an invoice date of less than one (1) year will be considered for a non-warranty related return. All materials returned to dormakaba USA Inc. ("dormakaba USA") for any reason (other than warranty), must have a correct RA number applied to the outside of the shipping carton. A thirty percent (30%) re-stocking charge (of the purchase price) will be applied to the Distributor's account for orders returned, including orders that were placed by customer in error. Transportation charges of returned goods must be prepaid by the Distributor. All goods must be returned within sixty (60) calendar days of RA issue date. All goods must be returned in original packaging and be in resalable condition. Product not returned in saleable condition is subject to disposal by dormakaba USA with no credit issued. Commercial Hardware items that are special made to order items will not be returned under any circumstances.

RA PROCESS: Requests for non-warranty related returns can be initiated by submitting an e-mail to BAS-rgacreditgrp.us@dormakaba.com.

The RA Request Form must be completed entirely to process an RA. The following information will be needed:

  • Company Name Sales Order Number
  • Account Number Item Number
  • Contact Name Item Quantity
  • Phone Number Description of the Problem
  • Purchaser Order Number
  • 1. Upon review and approval of the submitted RA request, a claim number is logged and provided back to the requestor by a dormakaba USA Team member:
  • 2. Once a claim number is issued, this number should be noted on all references and communications concerning said RA.
  • 3. Product should be returned to the address below. The shipment must be marked with the approved RA claim number to ensure prompt processing and attention. All shipping charges prepaid by customer.

dormakaba USA Inc. Attn: Returns Department 6161 East 75th Street Indianapolis, IN 46250

  • 4. The RA will be processed once material is received at dormakaba USA's factory provided it is received in its original packaging and is in saleable condition.
  • 5. Credit is issued to the Distributor account and a credit memo is mailed to the Distributor.

Any quality issues (missing parts, wrong parts, handing, finish, etc) should be submitted electronically to: BAS-rgacreditgrp.us@dormakaba.com or your Local dormakaba USA Representative.

Please reference your original Purchase Order (PO) Number, Factory Order Number, Distributor Account, Contact Information (E-mail/Fax), and include a detailed description of the issue.

1) ITEMS MISSING FROM A SHIPMENT: If you have signed your shipment short, dormakaba USA Customer Service will promptly issue a No Charge replacement order for the missing products.

If the shipment was not signed short but after review, dormakaba USA Customer Service determines (based on shipping weights, packing lists, etc) that the order was indeed shipped short, a No Charge replacement will be issued.

If dormakaba USA Customer Service cannot verify a shipping error, an advance replacement order will be entered, charged, and expedited to the Distributor. The quality issue will be forwarded to the Return Authorization Credit Group for resolution.

If it is determined that the item was omitted from the order due to a dormakaba USA order entry error, a change order will be entered and expedited for the missing products.

Please see price book for further detail.

2) WRONG ITEMS RECEIVED (parts, handing, function, finish, etc):

Advanced replacements will be issued for any wrong items received. Such orders will be charged based on pricing/ discounts from the original order. The issue will be forwarded to dormakaba USA's Return Authorization Credit Group for resolution.

Any quality issue that is determined to be either a dormakaba USA order entry and/or manufacturing error will have an advanced replacement order entered and will be expedited. An RA will be issued to return the incorrect products. No re-stock fee will apply for dormakaba USA order entry and/or manufacturing errors.

RETURN AUTHORIZATION FORM REQUEST

❏ Return for Replacement ❏ Return for Credit
Date of Request:
Original Order: NATURE OF PROBLEM
Date of Request:
Original P.O.: ❏ Manufacturing Defect
Invoice #: ❏ Warranty Evaluation
Customer Name: ❏ Missing Parts
Account Number: ❏ Wrong Material Received
Address: ❏ Wrong Material Ordered
City: ❏ Wrong Quantity
State:Zip: ❏ Return Inventory
Contact Name: ❏ Other:
E-mail:
Phone: 		NOTE: All returns shall be subject to dormakaba USA Inc.'s
current Terms of Sale and Warranty as outlined in the price
catalog.
❏ Ship Replacement Material to Address Above ❏ Ship Replacement Material to Address on Order
DETAILED DESCRIPTION OF DEFECT OR REASON FOR RETURN

RETURN MATERIAL
Line Item # Quantity Product Nomenclature Product Description

Please e-mail completed form to BAS-rgacreditgrp.us@dormakaba.com or Fax to 1-877-835-1030

Notes

6161 East 75th Street Indianapolis, IN 46250 USA

Phone 855-365-2407

stanleyhardwarefordoors.com