Keedex Safe Slick Material Safety Data Sheet

Open the original PDF document

View PDF

I PRODUCT I DENTIFICATI ON - 144
Manufacturer's Name KEEDEX CAS Number: CAS Number: 8009-03-8
Address 510 CAMERON STREET
PLACENTIA CA, 92870
MSDS Code:
NFPA Hazard I
Degree of Hazard
Health: 0
NFPA Hazard Indentification Degree of Hazard Hazard Rating 0 - Least
Fire: 1
Reactivity: 0
2 - Moderate
Emergency Telephone No. 714-993-4300 Tieacuvity. 0 3 - High
4 - Extreme
Trade Name SAFE SLICK # K-1
Synonyms PETROLATUM
II INGREDIENT S 10 17年19年5日 0.000
COMPONENT NAME
CAS NUMBER
HAZARDOUS
IN BLEND
PERCE ENTAGE
MAX
COMPONENT
EXPOSURE LIMITS
UNITS
PÉTROLATUM
8009-03-8
NO 100.00 OSHA PEL
ACGIH TLV
NO LIMIT
NO LIMIT
Sec. Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of the Contract of th araninin
Standard Control Armer etc.
Berlin,
********************** * 4, 5 W-10
and the second _

Keedex, Inc Effective: December 2013

LUI HEALTH EFFECT INFORMATION This product is non-irritating to the eves upon direct contact. EYE CONTACT SKIN CONTACT This product has not been tested for acute dermal effects. This product is not expected to cause any skin irritation upon direct single or repeated and prolonged contact; however, similar chemical composition products applied to the skin of laboratory animals resulted in minimal to slight dermal irritation. This product has a low vapor pressure and is not expected to INHALATION present an inhalation hazard at ambient conditions. Caution should be taken to prevent aerosolization or misting of this product. The permissable exposure limit (PEL) and threshold limit value (TLV) for this product as oil mist is 5 MG/M3. Exposures below 5MG/M3 appear to be without significant health risk. INGESTION Do not ingest. This product is practically non-toxic by ingestion. This product has laxative properties and may result in abdominal cramps and diarrhea. On rare occasions, prolonged and repeated exposure to oil HEALTH DATA mist poses a risk of pulmonary disease such as chronic lung inflammation. This condition is usually asymptomatic as a result of repeated small aspirations. Shortness of breath and cough are the most common symptoms.

MSDS CODE: 000237

PRODUCT:

Safe Slick # K-1

PAGE 3 OF 6

IV EMERGENCY & FIRST AID PROCEDURES

EYE CONTACT

Immediately flush eyes with large amounts of water and continue flushing for 15 minutes. If material is hot, treat for thermal burns and take victim to hospital immediately.

SKIN CONTACT

Remove contaminated clothing, wash contaminated area thoroughly with soap and water. If material is hot, submerge injured area in cold water. If victim is severely burned, remove to a hospital immediately.

INHALATION

This material has a low vapor pressure and is not expected to present an inhalation exposure at ambient conditions. If vapor or mist is generated when the material is heated or handled, remove victim from exposure. If breathing has stopped or is irregular, administer artificial respiration and supply oxygen if it is available. If victim is unconscious, remove to fresh air and seek medical attention.

INGESTION

May act as a laxative. Do not induce vomiting.

V PERSONAL HEALTH PROTECTION INFORMATION

EYE PROTECTION

Eye protection is not required under conditions of normal use. If material is handled such that it could be splashed into eyes, wear plastic face shield or splash-proof safety goggles.

SKIN PROTECTION .

No skin protection is required for single, short duration exposures. For prolonged or repeated exposures, use impervious synthetic rubber clothing, (boots, gloves, aprons, etc.) over parts of the body subject to exposure. If handling hot material, use insulated protective clothing (boots, gloves, aprons, etc.).

RESPIRATORY PROTECTION

Respiratory protection is not required under conditions of normal use. If vapor or mist is generated when the material is heated or handled, use an organic vapor respirator with a dust and mist filter. All respirators must be NIOSH certified. Do not use compressed oxygen in hydrocarbon atmospheres.

VENTILATION

If vapor or mist is generated when the material is heated or handled, adequate ventilation in accordance with good engineering practice must be provided to maintain concentrations below the specified exposure or flammable limits.

OTHER

Consumption of food and beverage should be avoided in work areas where hydrocarbons are present. Always wash hands and face with soap and water before eating, drinking, or smoking.

MSDS CODE: 000237

PRODUCT:

No Data

Safe Slick # K-1

PAGE 5 OF 6

VI FIRE PROTECTION INFORMATION

FLASH POINT

375F

TEST METHOD C.O.C.

TEST METHOD No Data

AUTOINGITION TEMPERATURE

FLAMMABLE LIMITS IN AIR % BY VOL.

LOWER No Data

UPPER No Data

EXTINGUISHING

MEDIA

Use dry chemical, foam, or carbon dioxide.

SPECIAL FIRE FIGHTING PROCEDURES

Water may be ineffective but can be used to cool containers exposed to heat or flame. Caution should be exercised when using water or foam as frothing may occur, especially if sprayed into containers of hot, burning liquid.

UNUSUAL FIRE AND EXPLOSIVE CONDITIONS

Dense smoke may be generated while burning. Carbon monoxide, carbon dioxide, and other oxides may be generated as products of combustion.

VIII REAGII VITY DATA
STABILITY
(THERMAL,
LIGHT, ETC.)
Stable CONDITIONS TO AVOID None
HAZARDOUS
POLYMERIZATION
Will Not Occur CONDITIONS TO AVOID None
INCOMPATIBILITY MATERIALS TO AVOID May react with strong oxidizing agents.

HAZARDOUS DECOMPOSITION PRODUCTS

None

VIII ENVIRONMENTAL PRECAUTIONS

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED

Consult Health Effect Information in Section III, Personal Health Protection Information in Section V, Fire Protection Information in Section VI, and Reactivity Data in Section VII. Notify appropriate authorities of spill. Contain spill immediately. Do not allow spill to enter sewers or watercourses. Remove all sources of ignition. Absorb with appropriate inert material such as sand, clay, etc.. Large spills may be picked up using vacuum pumps, shovels, buckets, or other means and placed in drums or other suitable containers.

WASTE DISPOSAL METHOD

All disposals must comply with Federal, State, and Local Regulations. The material, if spilled or discarded, may be a regulated waste. Refer to State and Local Regulations. Caution! If regulated solvents are used to clean up spilled material, the resulting waste mixture may be regulated. Department of Transportation (DOT) Regulations may apply for transporting this material when spilled. Waste material may be landfilled or incinerated at an approved facility. Materials should be recycled if possible.

IX MISCELLANEOUS

HANDLING AND STORAGE REQUIREMENTS

Do not transfer to unmarked containers. Store in closed containers away from heat, sparks, open flame, or oxidizing materials. This product is not classified as hazardous under DOT Regulations. Fire extinguishers should be kept readily available. See NFPA 30 and OSHA 1910.106 -- flammable and combustible liquids.

ADDITIONAL INFORMATION

No additional information.

X PHYSICAL PROPERTIES The state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the s
BOILING POINT Approx. 600F PERCENT VOLATILE N/A
MELTING POINT 97F - 105F VAPOR DENSITY (AIR = 1) N/A
APPEARANCE Blue, Opaque Semi Solid. EVAPORATION RATE (EE = 1) N/A
ODOR Odorless. SPECIFIC GRAVITY Approx. 0.852 @ 60/60
VAPOR PRESSURE N/A MOLECULAR WEIGHT Varies
SOLUBILITY Soluble in Hydrocarbons.