ETM- 5′ Template t529

TRICON - FULL MORTISE

.375

TEMPLATE HINGES

ELECTRIC THROUGH WIRE AND MONITOR TYPE ETM

DOOR LEAF

1.000

SIZES: $5\; \backslash times\; 4$ , $5\; \backslash times\; 4$ 1/2, $5\; \backslash times\; 5$

No.

Ε

Template No. T529 BY REVISION DATE ECO CT05035 8-15-05 RAM

FRAME LEAF

-.375

1.000

ETM MAXIMUM ELECTRICAL RATING SWITCH VOLTS 30V DC AMPERES .500A CONTACT THROUGH WIRE VOLTS 48V DC AMPERES 3.5A CONTINUOUS CURRENT 16.0A CURRENT INRUSH (300 MILLISECONDS)

DRILLING INSTRUCTIONS

FOR THROUGH WIRES.

NOTE A: DRILL AND DEBURR Ø 1" HOLE IN FRAME REINFORCEMENT

NOTE B:

1. NON-HANDED INSTALLATION-DRILL AND DEBURR TWO (2) 3/4" HOLES IN DOOR REINFORCEMENT PLATE FOR THROUGH WIRES. RIGHT HAND INSTALLATION—

DRILL AND DEBURR Ø 3/4" HOLE FOR THROUGH WIRES IN DOOR REINFORCEMENT PLATE ON BOTTOM LEFT.

3. LEFT HAND INSTALLATION-DRILL AND DEBURR Ø 3/4" HOLE FOR THROUGH WIRES IN DOOR REINFORCEMENT

PLATE ON UPPER RIGHT.

.508 1.171 2.500 1.250 1.484 1.250 2.500 1.171 .508 .437 -.812 SEE NOTE B -SEE NOTE A

-DO NOT SCALE-

CATALOG NUMBER				(F) DISTANCE	FROM	EDGE O	F LEAF	TO SWAGE	LINE
STEEL HINGES	NON- FERROUS HINGES		(E) KNUCKLE DIAMETER	5 x 4		5 x 4	1/2	5 x	5
AB700-ETM	AB800-ETM	.145	5/8	1 5/8		1 7/8	8	2 1/	8
AB750-ETM	AB850-ETM	.190	47/64	1 9/16		1 13,	/16	2 1/	16

ALL DIMENSIONS ARE IN INCHES.

Machine Screw Size- 12-24 x 1/2" F.H.

Wood Screw Size- No. 12 x 1 1/4" F.H. NOTE: This hinge is intended to be used in the center position.

Hospital type and round corner template hinges conform to the above screw

size and location. They are designated by "HT" and "RC" to catalog number. Hager template hinges are made in size, gauge and with screw holes located to conform to ANSI-A156.7.

HAGER RESERVES THE RIGHT TO MAKE DESIGN CHANGES WITHOUT NOTICE. CALL HAGER ENGINEERING AT 1-800-325-9995 FOR LATEST REVISION DATE OF TEMPLATE.

HAGER COMPANIES 139 VICTOR STREET P.O. BOX 12300 ST. LOUIS, MISSOURI 63157–0300