CM-25 Series, CM-30 Series, CM-40-41-45-46 Series, CM-60 Series, CM-2500 Series UL 61058-1, CAN-CSA-C22point2 Certification

AUTHORIZATION TO MARK

This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s) Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing Report.

This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be applied only at the location of the Party Authorized To Apply Mark.

Applicant: Camden Door Controls 5502 Timberlea Blvd.

Address: Mississauga ON, L4W 2T7

Country: Canada

Contact: Mr. Dave Mallen Phone: (905) 366-3377 FAX: (905) 366-3378

Email: dave@camdencontrols.com

Party Authorized To Apply Mark: Same as Manufacturer

Report Issuing Office: Mississauga

Control Number: 4000258 Authorized by:

Manufacturer: Camden Door Controls 5502 Timberlea Blvd.

Address: Mississauga ON, L4W 2T7

Country: Canada

Contact: Mr. Dave Mallen Phone: (905) 366-3377 FAX: (905) 366-3378

Email: dave@camdencontrols.com

fatricia fluener

´ William T. Śtarr, Certification Manager

RECOGNIZED COMPONENT

This document supersedes all previous Authorizations to Mark for the noted Report Number.

This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Authorization to Mark. Only the Client is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek's Certification mark is restricted to the conditions laid out in the agreement and in this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.

Intertek Testing Services NA Inc. 165 Main Street, Cortland, NY 13045 Telephone 800-345-3851 or 607-753-6711 Fax 607-756-6699

Standard(s): CAN/CSA-C22.2 No. 61058-1-05, 1st Edition, Switches for Appliances - Part 1: General Requirements

Harmonized with UL 61058-1, 3rd Edition, Switches for Appliances - Part 1: General Requirements IEC 61058-2-4, Edition 1.1, Dated 2003-03, Switches for Appliances - Part2-4: Particular Requirements

for Independantly Mounted Switches

Product: Egress Switches

Brand Name: N/A

Models:

CM-25 SERIES - CM-30, 35 SERIES - CM-40, 41, 45, 46 SERIES - CM-60 SERIES - CM-150, 160, 170,

180 - CM-200, 250, 280 SERIES - CM-300 SERIES - CM-810, 820, 830, 840, 850 - CM-1000, 1100, 1200 SERIES - CM-2000, 2200, 2500 SERIES - CM-3000, 3100, 3200, 3500 SERIES - CM-4000 SERIES - CM

5000 SERIES - CM-6000 SERIES - CM-7000 SERIES - CM-8000 SERIES - CM-9000, 9100 SERIES