ASSA ABLOY ACCENTRA 50 Series Regular, Top Jamb or Parallel Arms, Non-Hold Open Installation_80-9350-2531-010
Open the original PDF document
View PDF50 Series Door Closer Model 51
ACCENTRA ASSA ABLOY
Regular, Top Jamb, and Parallel Arms, Non-Hold Open Installation Instructions
MARNING
This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov.
MARNING
Attention Installer: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and ASSA ABLOY makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire-rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Model 51 Regular, Top Jamb, and Parallel Arms, Non-Hold Open
ASSA ABLO
ATTENTION:
An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These installation instructions should be followed to avoid the possibility of misapplication or misadjustment.
- For special applications, a separate door and frame preparation template is packed with these instructions. Use this instruction sheet for installation sequence and closer adjustments only.
- · Doors should be hung on ball bearing or anti-friction hinges.
- · A separate door stop is recommended.
- Always consult door/frame manufacturer for fastener compatibility.
- Door and frame must be properly reinforced.
- Adjust closing time speed between 3 and 7 seconds from 90° to 0°.
- These door closers should NOT be installed on exposed side (weather side) of exterior doors.
- Dimensions are given in inches (millimeters).
Supplied Hardware
| Mounting Hardware | Door or Frame | Drill | ||
|---|---|---|---|---|
|
Closer, PA Bracket:
1/4-14 x 1-1/2 Oval Flat Head Self Drilling Screw |
Wood/Metal | 3/16" (4.8mm) for wood | ||
|
Closer, PA Bracket:
1/4-20 x 3/4 Oval Flat Head Mach. Screw |
Metal | Drill #7 (.201 dia. or 5.1mm) | ||
| Jacobsono | Arm Shoe to Jamb or Door: 1/4-20 x 5/8 Round Head Mach. Screw | Wetai | Tap 1/4-20 | |
| (ARADOLOGO ARADOLOGO ARADOLOGO ARADOLOGO ARADOLOgo ARADOLOgo ARADOLOgo Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono Arabono |
Arm Shoe to Jamb or Door:
1/4-14 x 1-1/2 Round Head Self Drilling Screw |
Wood/Metal | 3/16" (4.8mm) for wood | |
| Closer: Sleeve Nut and Bolt (SNB) (optional) | Hollow Metal |
9/32" (7.0mm) thru
3/8" (9.5mm) door face opposite to closer |
||
|
with 1/4-20 x 3/4 Oval Flat Head Mach. Screw
(recommended) |
Aluminum or Wood | 3/8" (9.5mm) thru | ||
| December of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the st |
Closer:
Thru Bolt and Grommet Nut (TBGN) (optional) |
All |
9/32" (7.0mm) thru
3/8" (9.5mm) dia. x 3/8" (9.5mm) deep, door face opposite to closer |
|
Closer Adjustments
Use provided hex wrench to turn valves. NEVER force valves out of closer. NEVER completely close backcheck valve. Door must be open to adjust spring closing power. Refer to the chart.
(+
Weake
| Spring Closing Power | Number of Turns Required | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| _ | Type of 👃 | Maximum Door Size | |||||||
| Installation | * |
34"
(0.85M) |
36"
(0.90M) |
40"
(1.00M) |
44"
(1.10M) |
48"
(1.20M) |
|||
| lnterior | erior |
Regular Arm
Top Jamb |
Full 360° Turns | 2 | 4 | 6 | 10 | 12 | |
| Int | Parallel Arm | 3 | 5 | 8 | 11 | 14 | |||
| 51 |
5.
Exterior |
Regular Arm
Top Jamb |
3 | 5 | 8 | 11 | 14 | ||
| Parallel Arm | 5 | 8 | 11 | 16 | 19 | ||||
| *30 | *30 Full (360°) turns maximum available = turns as shipped | ||||||||
Pinion Cap or Cover
Do not over tighten cap or cover screws.
Regular Arm
Experience a safer and more open world
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. 80-9350-2531-010 Rev 3 05/24
Regular Arm Installation (Right Hand Shown)
A. Prepare door and frame.
B. Mount closer to door.
D. Connect arms and install forearm screw.
E. Preload spring and tighten forearm screw.
Go to page 2 for closer adjustments and decorative cap or cover installation.
Top Jamb Arm Installation (Right Hand Shown)
A. Prepare door and frame.
| Opening | Dimension "A" | |||
|---|---|---|---|---|
| to 100° | 7-1/2 (191) | |||
| 101° to 120° | 6 (152) | |||
| *121° to 180° | 3-1/2 (89) | |||
| *Door/Wall/Hardware/Jamb conditions permitting | ||||
B. Mount closer to frame.
D. Connect arms and install forearm screw.
E. Preload spring and tighten forearm screw.
Go to page 2 for closer adjustments and decorative cap or cover installation.
Parallel Arm Installation (Right Hand Shown)
A. Prepare door and frame.
|
Door
Opening |
Dimension
"A" |
Dimension
"B" |
Dimension
"C" |
||
|---|---|---|---|---|---|
| to 100° | 9-1/4 (235) | 7-5/8 (194) | 8-5/8 (219) | ||
| 101° to 130° | 7-3/4 (197) | 6-1/8 (156) | 7-1/8 (181) | ||
| *131° to 180° | 5-3/4 (146) | 4-1/8 (105) | 5-1/8 (130) | ||
* Door/Wall/Hardware/Jamb conditions permitting
B. Close latch and sweep valves. C. Install soffit plate and mount closer.
D. Remove arm shoe and install forearm to
E. Place main arm on closer spindle and rotate
Copyright © 2016, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. 855-557-5078 x 2 • www.accentra-assaabloy.com 80-9350-2531-010 Rev 3 05/24
50 Series Parallel Arm Installation (Right Hand Shown) cont.
F. Remove arm and attach as shown. G. Open latch and sweep valves.
H. Connect arms and install forearm screw.
I. Preload spring and tighten forearm screw.
Go to page 2 for closer adjustments and decorative cap or cover installation.