ALC-8 Programming Instructions1

PROM Programming. The ALPROM1 PROM is programmed on an accessory programmer, such as a NAMCO PROMIO. Refer to programmer amount of infinituations. PROM are transferred to semony as follows: (1) Become ac and bettery power. (2) Aliam dot on PROM with dot on circuit board and plug in PROM. (2) Apply power; -2 will appear in displays. (4) Pull out PROM (*8 Mill sizepear).

Programming Guide. Detailed programming instructions are contained in the PRO-GRAMMING GUID, later in this section. Entries are listed in alphanumeric order, not in order of PROM location.

Programming Record Sheets. Programming Record Sheets (PF162) similar to those that follow are completed when planning system features and communicator information for the particular instellation. Keep when for future reference.

matton to the purious installation. Resp bee for taxure reference. Dealer Koype Archaeler (Dere Koype) Programming is described in Hear's Guide center on control-panel board from USER to DEALER position. Noil doom key become from the temperature of the control-panel board from USER to DEALER position. Noil doom key (1) until the three LEDe light. Keypad will now function as follows: Key (2): Advances character in display (1-8) o. b. c., G. E. and F). Key (3): Key (3): Advances display to next section of a multisection location. Key (3): Key (3): Key (3): MOTE, No not resoure poser while in Program Houser in USER position). MOTE, No not resoure poser while in Program Houser in USER position. MOTE, No not resoure poser while in Program Houser in USER position. MOTE, No not resoure poser will be in Program Houser in USER position. MOTE, No not resoure poser will be in Program Houser in USER position. MOTE, No not resoure poser will be in Program Houser in USER position. MOTE, No not resoure poser will be in Program Houser in USER position. MOTE, No not resoure poser will be in Program Houser and the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position of the USER position o

Example: Program Zones: 0 to Report on Alarm. Meterring to Royal Program Zones 1: 0 to Report on Alarm is at E29, a twoReferring to Royal Program Zones 1: 0 to Zones 1: 0 to Zones 1: 0 to Zones 1: 0 to Zones 1: 0 to Zones 1: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2: 0 to Zones 2

	ZONE	NO LOWICLO
FEATURE	1 2 3 4 5 6 7 8	AC BAT OPN
REPORT ON ALARM	B29	B45
	(1)(2)(4)(8)(1)(2)(4 + 8)	2 9 0

NOTE: The programmed entry can be only one character, thus two digit data towals (such as "15" above) must be converted to a single character. From the following conversion chart, note that "15" is displayed and programmed as an "F".

Entry Total:	10	11	12	13	14	15
Dienlass.	_	h	С.	4	F	P

To program data entries obtained ("F" for section 1; 3" for section 2), more Program Jumper to DEALER position. Bold down Key [8] until all LEDs light (Program Mode). Press Key [8], [2], them [9] to access location B20 (Report of Alarm). Press Key [1] repeatedly until "F" (entry for section 1) is displayed. Press Key [3] to advance display to next section. Press Key [1] repeatedly until "3" (entry for section 2) is displayed. This completes programming for location B29. Bither (a) access another location to continue programming or (b) return Program Jumper to USER position and press Mays [1] and [9] to exit Program flows.