6202V – Narrow SVR Device Template

Open the original PDF document

€ of Device GRADE 1 NARROW STILE (FOR PANIC AND FIRE RATED DEVICCES) REV: 01,01/2011 C, D two holes are used for mounting outside trim, the diameter is same as A, B. This side up is for LHR door application, RHR door application is rotated 180° machine screws Wood Door - 1/8" (3 mm) Pilot Drill 2 Mounting Holes: Metal Door - Drill/Tap for #12-24 1 3/16" (30mm) Gap of 1/4" (6 mm) between door bottom and finished floor is required. For outside trim preparation, please refer to appropriate trim template. for wood screws Mark mounting holes through end cap bracket after device is cut and level. 19/32" (15mm) Glass bead kit available when required, it is sold separately Device horizontal centerline to be 40" from finished floor. (14mm) Mounting Holes: A,B 2 places Metal Door: For Mounting Screws — Drill/Tap for 1/4-20 machine screws For Sex Bolts — Drill $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ $ \text{0.5} $ \( \ Wood Door: For Sex Bolts only - Drill @ 13/32" (10 mm) through holes For Trim - Drill @ 1/2" (13 mm) through holes 4 12 0 Trim Actuating Shaft Hole: Drill © 1/2"(13 mm) through hole for BE & CE trims For NL trim hole requirement, see its template (Not required for dummy trim) of Device $\Theta$ 0 ىدى ᡊ മ 1 13/16" (46mm) Backset Backset 2 7/8" (73mm) (46mm) 13/16" ₹ £ _ 3 1/4" (83mm) PLACE THIS SIDE ON DOOR FOLD AND PLACE THIS SIDE ON DOOR EDGE OR STOP FACE FOLD HERE MARK HORIZONTAL CENTERLINE ON DOOR AND DOOR STOP NS DE TACE RHR DOOR INSIDE FACE

GRADE 1 NARROW STILE EXIT DEVICE LATCH TEMP

(FOR PANIC AND FIRE RATED DEVICES)

CUT HERE TO SEPARATE TOP TEMPLATE AND BOTTOM TEMPLATE