597, 598, 599 Series Holder & Stop Pull Side Installation

Open the original PDF document

View PDF
ACTUAL
DOOR WIDTH 		DEGREE OF OPENING AT HOLD D OPE OPEN (SEE NOTE 2 FOR STOP) 2 7/8"
MODEL 85° 90° 95° 100° 105° 110° 2 3/16*
NO. DOOK WIDTH A В A В A В A В A В A B C 11/16*
597H
&
597S 		24 * - 32 1 * 8 * 5 * 5 * 8 7 1 " 5 1 * 6 \frac{7}{8} 5 \frac{1}{4} 6 1 * 5 * 6 \frac{1}{4} 4 3 * 6 * 4 1 " 17 7 8
598H
&
598S 		32\frac{5}{8} - 39\frac{1}{8} 9 1 4 9 5 * 8 8 5 * 9 1 * 8 1 * 8 7 * 7 4 8 1 " 7 3 * 8 1 * 7 1 "
8 		7 7 8 19 " 195 ANGLE BRACKET DETAIL
599H
&
599S 		39 1 AND OVER 11 1 14* 10 5 * 13 1 / 2 10 * 12 7 / 8 9 1 7 12 3 / 8 9 1 * 12* 8 3 * 11 5 21 * 195 ANGLE
BRACKET
CONTIN — C ,
DOOR 7/16' 1 3/8 BOTTOM OF JAMB OF JAMB OOOR DRILL 5/16 HOLE FOR THRU-BOLT DRILL 7/16 HOLE
NOTES 1. REINFORCE METAL DOORS AND FRAMES PER ANSI 250.8 & SDI-100, 12 GAUGE RECOMMENDED. 2. DIMENSIONS ARE GIVEN FOR THE HOLD OPEN POSITION. DEAD STOP OCCURS 5°-9° AFTER HOLD OPEN. 3. FOR DEAD STOP TEMPLATING, ADD 1/8 TO DIM. "A" & 1/4 TO "B" 4. "A" & "B" DIMENSIONS ARE GIVEN FROM $\psi$ OF HINGE. A - ©
© © 		597- SCREWS
SCREWS 		D X 1/2 FL.HD MACHINE S OR #14 x 1 1/2 FL.HD S PROVIDED TOP OF
5. LEFT HAND SHOWN, RIGHT HAND OPPOSITE. 6. THRU BOLTS AND GROMMET NUTS ARE PROVIDED FOR 1 3/4 - 2 DOORS. 7. MOUNT TOP OF CHANNEL FLUSH WITH TOP OF DOOR. 8. DOOR REINFORCEMENT MUST PROVIDE CLEARANCE FOR MORTISE NUTS. SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT 06511 DATA SHEET: 597-599 HOLDER/STOP PULL SIDE INSTALLATION A7506 A